The Red Spider HF Only, a compact RFID reader, supports HF technologies (13.56 MHz), NFC, and Bluetooth Low Energy. It seamlessly integrates into devices like MFPs, vending machines, and E-charging solutions, offering connectivity via USB and RS232.

The Red Spider HF Only is a high-performance RFID reader that is compact and can easily blend in with any device it is built into. It supports HF technologies (13.56 MHz), NFC, and Bluetooth Low Energy, which makes it an ideal choice for mobile data communication and authentication. Similar to the Spider Core, it can be connected through various communication protocols, such as USB and RS232, and can be integrated into a range of devices, including MFPs, vending machines, E-charging solutions, and more.

ISO14443A: Mifare Classic, Mifare Classic EV1, Mifare Mini, Mifare DESfire Light/EV1/EV2/EV3, Mifare Ultralight Nano/C/EV1/AES, Mifare Plus S/X/EV1/EV2, Mifare Pro X, Mifare Smart MX, NFC HCE, NTAG2xx, SLE44R35, SLE55Rxx, SLE66Rxx ISO18092: ECMA-340: NFC Forum Tag 1-5, NFC Peer-to-Peer, NFC Active and passive communication mode ISO15693: i-CODE UID

PC ABS V0, Two tone colour, red and transparent

2.45 x 1.62 x 0.49 inch (L x W x D)

62,25 x 41,30 x 12,50 mm

2.4 GHz (BLE)

13.56 MHz

Integrated antenna on PCB

Decimal number HID Keyboard output with enter

4.3 V -5.5 V via pico blade connector

RF field idle on 150mA typically 280mA max.

-25 °C up to +85 °C

-13 °F up to +185 °F

5% to 95% non-condensing

Up to 100 mm, depending on the transponder and environment

Up to 4 inch, depending on the transponder and environment

Bluetooth v5.3, software upgradable; standards as GAP, SM, L2CAP, ATT; predefined GATT structure; AES128 supported

Approx. 23 g (excl. cable)

Approx. 0.81 oz (excl. cable)

Pico blade connector and variety of standard USB connectors, use only with original inepro cables.

Host: USB Full speed (12Mbit/s), HF Air: up to 848 kbit/s, BT Air: up to 100 kbit/s

USB keyboard emulation, USB virtual COM port, USB RAW, RS232

21%