Inloggen

Red Spider HF Desktop MFP Complete 15A

200051_1.jpeg
200051_2.jpeg
200051_3.jpeg
200051_4.jpeg
200051_6.png

Description

The Red Spider HF Desktop supports HF technologies (13.56 MHz), and by supporting NFC and Bluetooth Low Energy, the Red Spider RFID reader is perfectly suitable for mobile data communication and authentication. It can be linked via the USB Type A male connector to any device such as an E-PoS solution, laptop, computer and many more. The Red Spider HF Desktop MFP set, comes with a Type A Male USB cable measuring 15cm (5.90 inches).

Specifications

Housing
PC ABS V0, Two tone color, white and Intelligent dark grey
Dimensions (mm)
77,20 x 51,80 x 14,55 mm (LxBxD)
Frequency (Khz)
2.4 GHz (BLE)
Frequency (Mhz)
13.56 MHz (HF)
Antenna
Integrated antenna on PCB
Default output
Decimal number HID Keyboard output with enter
Power Supply
4.3 V -5.5 V via pico blade connector
Current Consumption
RF field idle on 150mA typically 280mA max
Temperature range C
Operating: -25 °C up to +85 °C
Temperature range F
Operating: -13 °F up to +185 °F
Relative humidity
5% to 95% non-condensing
Read Write distance (mm)
Up to 100 mm, depending on the transponder and environment
Read Write distance (inch)
Up to 4 inch, depending on the transponder and environment
Operating modes - USB keyboard emulation
Bluetooth Low Energy
Bluetooth v5.3, software upgradable; standards as GAP, SM, L2CAP, ATT; predefined GATT structure; AES128 supported
Connectivity
Pico blade connector and variety of standard USB connectors, use only with original inepro cables.
Certification - CE
Certification - IC
Certification - UKCA
Certification - FCC
Short Description
Inside the box, you'll find the fully assembled Red Spider HF Desktop MFP set, along with a Type A Male USB cable measuring 15cm (5.90 inches), ensuring straightforward setup and immediate functionality.
Full Description
The Red Spider HF Desktop supports HF technologies (13.56 MHz), and by supporting NFC and Bluetooth Low Energy, the Red Spider RFID reader is perfectly suitable for mobile data communication and authentication. It can be linked via the USB Type A male connector to any device such as an E-PoS solution, laptop, computer and many more. The Red Spider HF Desktop MFP set, comes with a Type A Male USB cable measuring 15cm (5.90 inches).
Supported transponders 13.56 MHz
ISO14443A: Mifare Classic, Mifare Classic EV1, Mifare Mini, Mifare DESfire Light/EV1/EV2/EV3, Mifare Ultralight Nano/C/EV1/AES, Mifare Plus S/X/EV1/EV2, Mifare Pro X, Mifare Smart MX, NFC HCE, NTAG2xx, SLE44R35, SLE55Rxx, SLE66Rxx ISO18092: ECMA-340: NFC Forum Tag 1-5, NFC Peer-to-Peer, NFC Active and passive communication mode ISO15693: i-CODE UID